Friday, January 13, 2012

Tech 21 LM-300 Landmark 300 Bass Amp Head

Tech 21 LM-300 Landmark 300 Bass Amp Head Review



Tech 21 LM-300 Landmark 300 Bass Amp Head Feature

  • 100% analog
Two differently formatted channels deliver everything from warm classic tube tones to Sumo-sized distortion. This 2U, 300-watt rackmountable head features a fan-cooled chassis and is equally at home in a rack system or as a compact stand-alone head. Its heavy gauge steel case is touring tough. With pro features like a +10dB gain switch to enhance low output pickups and drive active pickups harder, and aSansAmp XLR Direct Output, this amp will quake the bedrock live and in the studio.

  • SansAmp XLR Output works like a built-in direct box to deliver the true tone of the amp to the PA desk or studio board without compromising detail, warmth or responsiveness. The XLR is switchable from -20dB to 0dB
  • Gain is a 10dB gain boost to set up the pre-amp for different pickups. For example, with lower output, passive pickups, you can have punchier sounds with Gain engaged. Conversely, with higher output, active pickups, you can have a cleaner sound with Gain disengaged
  • Effects Loop
  • Tuner Output - Independent buffered output provides a constant unaffected signal
  • 1/4” speaker outputs
  • Rackmount Kit
SPECIFICATIONS
Model Number:

LM300

Input Impedance: 1MOhm 
Nominal Input Level: -20dBu
Optimal Output Load: 4 Ohms 
Power Output: 300W
Effect Loop Input Impedance1MOhm
Maximum Effect Loop Input*approx. -6dBu
Nominal Effect Loop Output Impedance1KOhm
Nominal Effect Loop Output*approx. -10dBu
Nominal XLR Output*0 to -10dBu
Maximum Power Consumption: 600W
AC Input Power:100V, 117V, 230V, 240V
NOTE: AC power cannot be switched. See authorized dealer/distributor for voltage modification information. 
Cycles:

50/60 Hz 

SpeakerNA.
Dimensions: 17”w x 3.5”h x 10”d
Weight:

23 lbs


.


No comments:

Post a Comment