Tech 21 Bronzewood 60 1x12" Acoustic Guitar Combo Amplifer Review
The Bronzewood 60 was specifically designed to get the very best from your electro-acoustic instruments, while integrating a dedicated microphone channel. The Guitar channel features an adjustable compressor, reverb, active three-band EQ with semi-parametric sweepable mids and SansAmp tube/mic emulation circuitry to remove the harsh harmonics from piezo pickups. The Mic channel has switchable phantom power for condenser microphones, active EQ and mixable reverb. From the Elvis-cool crocodile vinyl covering to the sweet open tone, this is the last word in amps for any acoustic player headed for the stage or studio. Guitar Channel Compressor, ranging from 1:1 to 5:1 Phase switch Preamp control Notch filter Mid Shift and Mid are sweepable, semi-parametric EQ controls and range from 170Hz to 3kHz, ±16dB, respectively Active tone controls, boost or cut ±12dB Unique Blend control enables you to determine the ratio of direct instrument signal and SansAmp Tube/Microphone Emulation circuitry Full-length, 6-spring Accutronics® reverb Mic Channel XLR mic level female input 24V phantom switch to power a condenser microphone (or any other phantom powerable product) 3-band active EQ controls Reverb Mix to control the balance of reverb between the Guitar and Mic channels BW60 ADDITIONAL FEATURES Special design 12? speaker and high frequency horn. Mid Shift and Mid EQ controls range from 170Hz to 3kHz, ±16dB respectiv...